Motor for Screwdriver Antennas

Product Information

Motor for Screwdriver Antennas

Runs on 12 Volts

We had a mold made and then injection molded the motor housing.  There is a Johnson motor inside the housing.  We put three disc capacitors on the motor to surpress noise.   At back end of the housing we have put two resistors to drop the voltage to the motor.  There are two wires that exit the housing for your connection to 12 volts DC.  The housing is designed to fit inside a 2 inch tube.  The housing is about 4 inches by 1 7/8 inches.  The housing is held in the aluminum tube with two #6 sheet metal screws.  The motor shaft has an 1/8 hole for a cotter pin.  We have a very limited quantity of this motor.

Be the first to review this product!

Price: $75.00

• Tell a Friend
• Write review / comment